User's Manual

of systems that have only one site, and you need only ensure
that this one site is also selected when you import.
In cases where there are more than one site to choose, you have
a few options.
In every case, the easiest way to bring in a systemʼs sites and
talkgroups is to simply place a checkbox next to the systemʼs
name after you drill in from the Systems level of the library from
either the States or Counties/Cities level. This selects every site
in the system, and every talkgroup as well. For example:
•
Access the Library from the Main Menu
•
Scroll to Indiana and press the  key
•
Scroll down to Systems and press the  key.
At this level you will see the one system in Indiana with statewide
coverage, the Indiana Project Hoosier SAFE-T state public safety
radio system. If you press the ▶/II/SEL key, a check will be
placed next to the system name, marking every site and
talkgroup on the system for importing into the library (this will
take a few minutes due to the number of sites and talkgroups in
this large statewide system).
However, you may not want to listen to every single talkgroup on
the system, or you may want to restrict operation of the radio on
this system to only those sites you choose, which will give the EZ
Scan-SD less work to do and ultimately speed up its operation.
To refine your selection:
•
Press the  key at the System name
•
To view and pick sites, scroll to Sites and press the  key.
You can pick every site and let the EZ Scan-SD do the
work for you, finding the best site to use, or, you can
speed things up by selecting the sites that are close to
your location.
•
To view and pick talkgroups, scroll to Categories and
press the  key, and either pick entire Categories to
select every talkgroup in the category, or drill into a
category to view and pick talkgroups that are grouped in
the category.
GENERAL RESEARCH OF ELECTRONICS, INC. PROPRIETARY AND CONFIDENTIAL INFORMATION
EZ Scan-SD Preliminary User Manual" Page 33