User's Manual

cause iSCAN to malfunction.
SD Card error messages
iSCAN’s SD Card must be formatted correctly for proper operation. If the SD Card is
corrupted, defective, improperly formatted or missing, iSCAN will report one or more of the
following errors:
Unable to get an initialization response from the SD Card at power-up:
No SD Card found
Unable to read valid low-level file system information (partition tables, etc.) from
installed SD Card at power-up:
No file system on SD Card
SD Card has a cluster size other than 32kB – 32kB is required by iSCAN:
Bad file system: 32k clusters required
Unrecoverable error reading the SD Card. Power-cycle may resolve:
SD Read Error
Unrecoverable error writing the SD Card. Power-cycle may resolve:
SD Write Error
The SD Card has no more free space:
SD Card Full!
iSCAN’s Main Menu
The heart of iSCAN’s user interface is the Main Menu, where all of the major functions are
controlled. The following options are available in the Main Menu:
Play
Begins playback (scanning) of imported objects in enabled Playlists. Use the  or ▶/II/SEL
keys to activate Play mode.