Spec Sheet

ManualsBrandsGeneral Pump ManualsPumpsPlatinum Emperor Series 3000 PSI 4.0 GPM Solid Shaft Triplex Pressure Washer Pump (Belt Drive)

GENERAL PUMP

A member of the Interpump Group

PLATINUM SERIES

SPECIFICATIONS

Pump Model

PEHT2010S PEHT2012S PEHT2213S PEHT2214S

Maximum Volume

4.00 GPM 3.43 GPM 4.76 GPM 3.96 GPM 2.64 GPM 5.55 GPM 3.43 GPM 4.00 GPM

Maximum Pressure

3,000 PSI

Maximum RPM

1750 RPM 1450 RPM 1750 RPM 1450 RPM 950 RPM 1450 RPM 950 RPM 950 RPM

Horsepower

8.2 EBHP 7.0 EBHP 9.8 EBHP 8.1 EBHP 5.4 EBHP 11.4 EBHP 7.0 EBHP 8.2 EBHP

Maximum Inlet Pressure

125 PSI

Minimum Inlet Pressure

3 ft. water (2.6 in. Hg)

Maximum Fluid Temperature

185

Bore (in / mm)

.787 in./20 mm .787 in./20 mm .866 in./22 mm

.866 in./22 mm

Stroke (in / mm)

.394 in./10 mm .472 in./12 mm .512 in/13 mm

.551 in./14 mm

Oil Capacity

22 oz.

Inlet Port Thread

1/2” - 14 BSP-F

Discharge Port Thread

3/8” - 19 BSP-F

Shaft Diameter

.945 in./24 mm

Weight

21.0 lbs.

Dimensions - Nominal

10.4” x 8.8” x 5.4”

FEATURES

EMPEROR

• Features patented “high tech” packings:

-dynamic low-pressure seal retainer

-superior low-pressure seal

-innovative intermediate ring

-superior high-pressure seal

• Ceramic plungers

• Patent-pending inlet/outlet valve cage

• Forged Stainless Steel manifold (AISI420B),

nickel-plated

• Nickel-plated crankcase

• Heavy-duty tapered roller bearings

• Specifically designed to handle rigorous duty

cycles, high temperatures and chemicals

• Ideal for use in car wash and other high

pressure cleaning applications

General Pump is a

Member of

The Interpump Group

Ref 310065 Rev. D

01-20

Summary of content (4 pages)

PAGE 1
GENERAL PUMP A member of the Interpump Group FEATURES PLATINUM SERIES • Features patented “high tech” packings: -dynamic low-pressure seal retainer -superior low-pressure seal -innovative intermediate ring -superior high-pressure seal EMPEROR • Ceramic plungers • Patent-pending inlet/outlet valve cage • Forged Stainless Steel manifold (AISI420B), nickel-plated • Nickel-plated crankcase • Heavy-duty tapered roller bearings • Specifically designed to handle rigorous duty cycles, high temperatures and ch
PAGE 2
GENERAL PUMP Platinum A member of the Interpump Group Instructions and Recommendations for the Installation of PEHT Series Pumps The high-temperature pumps of the HT series have been designed for use in applications where the water must be pre-heated, such as in carwash, food and pharmaceutical industries. the pump, for example for a 4 gpm (15 l/min) pump, put a filter from 16 to 20 gpm (6075 l/mi). The mesh size suitable for this application is 0.016” (.4 mm).
PAGE 3
PEHT Series GENERAL PUMPA member of the Interpump Group PARTS LIST ITEM 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. PART NO. 59122036 59122136 36202551 94737600 36711501 36200366 701115 36711501 701002 98222500 99169000 96690500 59040009 59040109 701014 36211366 36211276 94733300 36211151 36719301 701016 98213750 99317500 90226000 90231200 DESCRIPTION Manifold, Ø 20 Manifold, Ø 22 Valve Cage Spring, Ø 9.4x14.8 Valve, Spherical Valve Seat, Inlet O-ring, Ø17.13v2.
PAGE 4
GENERAL PUMP A member of the Interpump Group PEHT SERIES DIMENSIONS GENERAL PUMP 1174 Northland Drive • Mendota Heights, MN 55120 Phone: 651.686.2199 • Fax: 800.535.1745 • e-mail: sales@gpcompanies.com • www.generalpump.com Ref 310065 Rev.