Repair Manual User Manual

GENERAL PUMP
A member of the Interpump Group
KF SERIES
Page 11
B) Remove the head from the crankcase.
C)Extract the high pressure seals from the head, and the low pressure seals from their related support by
using standard tools as shown in 5, fig. 18; be careful not to damage the seats.
Pay careful attention to the order of sealing pack disassembly as shown in fig. 19, composed of:
1. Head ring
2. HP seal
3. Re-stop ring
4. Packings support
5. LP seal
6. Sealing ring
7. Circlip
8. O-ring
Ref 300917 Rev.A
12-12