Spec Sheet

ManualsBrandsGeneral Pump ManualsPumpsET Series 2610 PSI 1.85 GPM Hollow Shaft Electric Flange Triplex Plunger Pump

GENERAL PUMP

A member of the Interpump Group

ET Series

SPECIFICATIONS

Pump Model

ET1509E17 ET1807E17 ET1809E17 ET1504E34 ET1505E34 ET1506E34 ET1507E34

Maximum Volume

2.1 GPM 2.4 GPM 3.2 GPM 1.85 GPM 2.1 GPM 2.9 GPM 3.2 GPM

Maximum Discharge Pressure

2,610 PSI 2,320 PSI 2,610 PSI

Horsepower

3.7 EBHP 3.8 EBHP 5.0 EBHP 3.6 EBHP 3.7 EBHP 5.2 EBHP 5.6 EBHP

Maximum Pump Speed

1700 RPM 3400 RPM

Maximum Inlet Pressure

125 PSI

Max. Inlet Vacuum

3 ft. water (2.6 Hg) Flooded

Plunger Bore (in / mm)

.591 in./15 mm

.708/18 mm

.591 in./15 mm

Plunger Stroke (in / mm)

.370 in./9.4 mm .283 in./7.2 mm .370 in./9.4 mm .157 in./4 mm .197 in./5 mm .256 in./6.5 mm .283 in./7.2 mm

Oil Capacity

8.5 oz.

Maximum Fluid Temperature

165

Inlet Port Thread

1/2”-14 BSP-F

Discharge Port Thread

3/8”-19 BSP-F

Shaft Diameter

5/8” Hollow

Weight

11.0 lbs.

Dimensions - Nominal

7.3” x 7.4” x 5.5”

FEATURES

TRIPLEX

• “HR” anti-corrosion surface treatment

on manifold

• New generation seal package

• Dust protection chamber

• Solid ceramic plungers

• Oversized plunger guide

• Optimized inlet and outlet valves

• Oversized crankcase

• Hollow shaft, flanged for direct couple

to electric motors (NEMA56C)

Triplex Plunger Pump, Electric

Ref 300967 Rev. G

08-20

General Pump

is a member of

the Interpump Group

March 1, 2020 and later

Summary of content (4 pages)

PAGE 1
GENERAL PUMP ET Series A member of the Interpump Group Triplex Plunger Pump, Electric March 1, 2020 and later TRIPLEX FEATURES • “HR” anti-corrosion surface treatment on manifold • New generation seal package • Dust protection chamber • Solid ceramic plungers • Oversized plunger guide • Optimized inlet and outlet valves • Oversized crankcase • Hollow shaft, flanged for direct couple to electric motors (NEMA56C) SPECIFICATIONS Pump Model ET1509E17 ET1807E17 ET1809E17 ET1504E34 ET150
PAGE 2
GENERAL PUMP ET Series A member of the Interpump Group Hollow Shaft - Electric Instructions and Recommendations for the Installation of ET Series Pumps Maximum temperature of the water through the pump is 165⁰ F (73⁰ C). In order to obtain maximum performance in terms of duration of seals and valves, it is necessary to respect a few simple rules, as follows: 1) In order to avoid damage caused by cavitation, the pump must be pressure fed.
PAGE 3
GENERAL PUMP ET Series A member of the Interpump Group Hollow Shaft - Electric PARTS LIST ITEM 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. PART NO.
PAGE 4
GENERAL PUMP ET Series A member of the Interpump Group Hollow Shaft - Electric TORQUE SPECS* REPAIR KITS KIT NO. K309 Ø 15 K311 K312 ITEM NO’S INCLUDED IN KIT 2, 3, 4, 5, 6, 13, 14, (7), (15) NUMBER OF ASSY’S IN KIT NO. OF CYLINDERS KIT SERVICES 31 17, 18, 19, 21, 22 Ø 18 K313 17, 18, 19, 20, 21, 22, 56 K314 17, 18, 19, 21, 22 K315 17, 18, 19, 20, 21, 22, 56 6 3 3 1 3 1 3 3 3 1 3 1 Position Ft.-Lbs. Nm. 8 8.9 12 10 4.4 6 16 8.9 12 24 30 40 26 30 40 36 7.