Product Manual

GENERAL PUMP
A member of the Interpump Group
OPERATION INSTRUCTIONS (continued)
To begin spraying:
Start the pressure washer.
Raise the wand and keep the nozzle at least ten feet away from the surface to be cleaned. Keep
the extension wand clear of power lines.
Squeeze the trigger to begin spraying, maintain stable footing, and move the wand in to the
surface to be cleaned.
Caution: Except in cases of emergency, do not release the trigger near any surfaces.
To stop spraying:
Before releasing the trigger gun move the nozzle at least ten feet away from the surface being
cleaned and make sure you have solid footing. The wand will rebound when the trigger is
released or if pressure is lost. USE EXTREME CAUTION when working on or near fragile
surfaces as there may be enough force to damage surfaces or break windows. Keep clear of
power lines. When you are clear of the work surface and in a safe area - release the trigger.
D20015 - Wand Support Belt
• Reduces strain on back, shoulders,
and arms of the operator
ACCESSORIES
D20011 - 12” Gutter Cleaner
5 Pack Nozzle Kits
Kit includes one each:
0º - 15º - 25º - 40º High Pressure Nozzles
and one 25º #40 Soap Nozzle
QC Fixed Chemical Injectors
Flows to 8.0 GPM
Pressures to 3500 PSI
1.8mm, 2.0mm, 2.2mm Orifices
Hose Reels
• 3500 psi
• 50’, 100’, 150’, and 200’ Capacities
Y3K Rotating Nozzles
Nozzle Sizes #2.0 to #6.5
Pressures to 3000 PSI
Ref 300869 Rev A
10 11