GENERAL PUMP A member of the Interpump Group ACCESSORIES THE GIRAFFE HEAVY DUTY LINE ACCESSORIES 18’ 24’ High-Pressure All Aluminum Extendable Wands
GENERAL PUMP A member of the Interpump Group Thank you for purchasing a Giraffe Heavy Duty extension wand from General Pump. With proper care your new Giraffe Heavy Duty extension wand will give you years of reliable service. Your safety is important to us. Please read and make sure you understand all of the safety warnings and precautions prior to using your Giraffe Heavy Duty extension wand.
GENERAL PUMP A member of the Interpump Group SPECIFICATIONS* Wand Model DLTG18HDA DLTG24HDA Maximum Volume 10.5 GPM Maximum Gun Pressure 4000 PSI Maximum Fluid Temperature 195ºF Shipping Weight 15.3 lb. Dimensions - Retracted 6.8” x 6’5” 20.6 lb. 6.8” x 8’5” SAFETY WARNINGS AND PRECAUTIONS S TO P THE USER OF THIS ACCESSORY IS RESPONSIBLE FOR READING, UNDERSTANDING, AND FOLLOWING ALL WARNINGS AND PRECAUTIONS PRIOR TO OPERATION.
GENERAL PUMP A member of the Interpump Group SAFETY WARNINGS AND PRECAUTIONS This label appears on the extension wand. Do not remove or deface. If the label becomes damaged or unreadable please call for a no charge replacement. DANGER DANGER PELIGRO ELECTRIC SHOCK HAZARD Do not use on or near electrical wiring of any kind. Keep at least 10 feet (3 meters away from power lines. Do not touch or aim spray at electrical wiring of any kind. Do not operate from ladders or elevating devices on any kind.
GENERAL PUMP A member of the Interpump Group ASSEMBLY To protect the coupler and lance during shipping these parts are shipped strapped to the extension pole. All Giraffe wands require some final assembly. To complete the assembly: 1. Using thread sealant, connect the hose to the brass adapter. 2. Remove the two screws from the brass adapter and slide the brass adapter into the aluminum wand. Be sure the angle of the lance bends away from the location of the gun on the wand. 3.
GENERAL PUMP A member of the Interpump Group OPERATION INSTRUCTIONS (continued) To begin spraying: Start the pressure washer. Raise the wand and keep the nozzle at least ten feet away from the surface to be cleaned. Keep the extension wand clear of power lines. Squeeze the trigger to begin spraying, maintain stable footing, and move the wand in to the surface to be cleaned. Caution: Except in cases of emergency, do not release the trigger near any surfaces.
GENERAL PUMP A member of the Interpump Group PARTS LIST & EXPLODED VIEW Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Part Number 2103002 2550007 2550010 2550005 2550008 2550006 2550009 2103003 2660064 2660065 2660066 2520038 2530001 2200060 2702001 2702003 GPC0058 2702002 2702004 D10001 Description LOCK, PIN, ROUND TUBE, HEX, 24 MM TUBE, HEX, 24 MM, 24’ TUBE, ROUND, 48 MM TUBE, ROUND, 48 MM, 24’ TUBE, HEX, 30.5 MM TUBE, HEX, 30.5 MM, 24’ LOCK, PIN, HEX STOP, HEX STOP, ROUND TUBE STOP, HEX, 24.
