Brochure

9
Specifications:
Weight:
22 lbs. (10 kg).
Dimensions:
22" deep x 13-1/2" wide x 15" high (without hose).
(56 cm x 34 cm x 38 cm).
Drum:
Heavy gauge stamped aluminum with inner drum to prevent
cable tangling.
Capacity:
50 ft. of 1/4" or 5/16" cable; 35 ft. of 3/8" cable. All cables are
left hand wound and reinforced with a wire rope center.
The Drain-Rooter PH is a real labor-saver on long
jobs, or when working in cramped areas where the
weight of the machine could be burdensome.
Equipped with a variable speed power cable feed
and variable speed motor, the Drain-Rooter PH
makes drain cleaning jobs cleaner and easier.
It feeds and retrieves the cable at up to 16 feet
per minute. A four foot guide hose eliminates
cable whipping, dirty fixtures, and messy floors.
The drum speed can be varied by changing the
pressure on the foot pedal. The Drain-Rooter PH
can be operated in both horizontal and vertical
positions to get closer to the drain opening.
A quick-change cartridge system allows you to
switch to different diameter cables without pulling
the old cable out of the drum.
The drum holds up to 50 ft. of 1/4" or 5/16" cable
or 35 ft. of 3/8" cable. Units with 3/8" cable
include our five piece HECS cutter set. Of course,
the cables are super-tough Flexicore
®
with a wire
rope center.
Small Line Drain Cleaners 1-1/4" – 3"
Drain-Rooter™ Economy Drain Cleaner
The less expensive Drain-Rooter has the same
variable speed motor as the Drain-Rooter PH,
but uses a Jacobs chuck to secure the
cable rather than a power cable feed.
It has the same capacity and quick-
change cable cartridge
as its big brother.
Drain-Rooter PH
The Clean Machine
™
Power Cable Feed:
Variable speed with feed control tube.
Drives 1/4", 5/16", and 3/8" cables.
Cutter Set: See page 30.
Motor:
All ball-bearing, double insulated, reversible motor with
speed control; 0-500 rpm. 230 and 240 volt units available.
Foot Pedal:
Pneumatic foot pedal controls variable speed motor.
Leaves operator’s hands free to control cable.