Brochure

6
When working under sinks or in other awkward
places, the Power-Vee is like having an extra hand.
Just squeeze the feed lever, and three offset rollers
in the automatic feed grip the cable and drive it into
the line.
It’s easy to use. To feed the cable, start the Power-
Vee motor and squeeze the feed lever; to retract,
reverse the motor and squeeze. The Power-Vee feeds
3/8" cable at 16 feet per minute.
The Power-Vee handles 1/4" through 3/8" cables
without any need for adjustment. Squeezing the feed
lever brings the rollers into solid contact with the
cable, with minimum effort by the operator.
Our Dyna-Thrust™ bearing system helps carry the
weight of the drum, significantly reducing wear on
the motor shaft bearing and extending the life of the
tool. Also adding to the Power-Vee’s durability is the
heavy-gauge stamped aluminum drum. Of course
the cables are Flexicore
®
– with an integral wire rope
center. Nobody makes cables like General.
The Power-Vee includes Quick-Change Cable
Cartridges and tough left-wound Flexicore wire
rope center cables.
Power-Vee Handy-Stand™
Power-Vee
With Power Cable Feed – Works Great in Tight Spots
®