Brochure

Cameras and Locators
Specifications:
Sonde 10 Range:
Up to 10 ft. through cast iron or 15 ft. through clay
or plastic lines.
Sonde 20 Range:
Up to 20 ft. through cast iron or 30 ft. through clay
or plastic lines.
Frequency: Size: Battery:
512 Hz. 3/4" x 3-1/2". One AAA Alkaline.
Spring carrier for Sondes with General coupling. Adapters for other brands available.
Hot-Spot Transmitter
5 Watts – 4 Frequencies
Sonde 20 (Actual Size)
Locating buried utilities used to be tough. Not anymore! With the
powerful 5-watt Hot Spot transmitter, location is easier than ever.
More power means more signal to locate. Choose one of 4
frequencies – 1KHz, 8KHz, 33KHz or 65KHz. You can select the
frequency and power that best suits your application.
Locate via direct connection using the cords and ground stake.
Simply attach the transmitter leads to both ends of the pipe, or if
the other end of the pipe is not accessible, use the ground stake
to complete the circuit. Or place the transmitter over the pipe and
use induction mode, or place the optional clamp around the pipe
to energize the line.
The transmitter’s LCD graphic display with auto backlight lets you
quickly check connectivity and line resistance to make sure you’re
transmitting efficiently for a stronger signal for easier tracking and locating.
The display also indicates power output, frequency, and battery level.
Specifications:
Line/Utility Frequencies:
1KHz, 8KHz, 33KHz, 65KHz
Weight:
8 lbs./3.5 Kg
Output:
5 Watts with 5 output settings
Batteries:
10 D-cell alkaline (Approximately 100+ hours of life)
Antenna Configurations:
Total Field, Single Peak, Twin Peak, Null and Left/Right
(Line Location Only)
Dimensions:
10" H x 12" L x 8" W
(25.4 cm x 30.5 cm x 19 cm)
Operating Temperature Range:
-4° F to 122° F (-20° C to 50° C)
Also available in a 1-Watt single frequency (65KHz) model
Gen-Eye Sondes are a great tool for pipe location in cast iron,
clay, or plastic lines. Sondes are a far less expensive way
of locating lines than video pipe inspection systems, and
easier than pipe transmitters. Easier than locating an energized
line, you simply locate the pin-point frequency of the sonde.
The compact sonde transmits at 512 Hz and is powered by a AAA
battery. Locate the Sonde 10 at depths of up to 10 ft. in cast iron
pipe, or 15 ft. in clay or plastic; or locate the Sonde 20 at depth
of up to 20 ft. in cast iron pipe, or 30 ft. in clay or plastic.
Attach the sonde to your drain cleaning cable using the spring
carrier. Adapters for other brands of drain cleaning machines are
available. The carrier protects the sonde as it travels down the
line. Or you can tape the sonde onto a water jet hose, push-rod,
flat rod, or other devices.
49
Sonde 10 (Actual Size)
®
®
Gen-Eye Sondes