Brochure

29
Sectional Drain Cleaners 3" – 14"
Specifications:
Weight:
185 lbs. (84 kg).
Dimensions:
29" wide x 44" long x 40" high (74 cm x 112 cm x 102 cm).
Handle is removable for easy storage.
Engine:
208 cc Briggs and Stratton 4 cycle.
Transmission:
Snow and Nabstedt reversing “hot-shift” transmission drives
3/4" roller chain. No clutch needed.
Speed Range:
From 100 rpm to 200 rpm for municipal rods; 200 rpm to
400 rpm for sectional cables..
Safety Slip Clutch:
Protects against excessive torque being applied to cable or
rods. Easily adjustable.
Coil Spring Sections:
1-1/4" x 10 ft. long with inner spring to handle torque better
than hollow cables.
Cable Sections and Cutters: See page 30 – 32.
Municipal Rods and Cutters: See page 58.
The gasoline powered Rodrunner Model E is ideal for cleaning
long runs up 500 ft. down the line. It can be coupled to either 10
ft. sectional cables to clear up to 14" lines, or 5/16" municipal
rods to clear up to 24" in diameter. The operator stands behind
the machine and walks the cable or rods into the line.
It’s driven by a powerful 208 cc Briggs and Stratton engine. Drive
speed is set at 100 to 200 rpm for municipal rods or 200 to 400
rpm for sectional cables.
The “hot-shift” transmission lets you switch from forward to
reverse without the need for a clutch. The long gear shift lever is
within easy reach of the operator.
And features like the 3/4" drive chain and safety slip clutch to
protect the cables and rods against excessive torque build-up
mean low maintenance.
Rodrunner Model E
Drives Municipal Rods or Sectional Cables
®
EG-CDC
The sectional cable drive coupling for “G” cables doesn’t need
a wrench either. Just turn the knurled ring to lock the cable
coupling in place.
E-MRDC
The municipal rod drive coupler doesn’t need a wrench to couple and
uncouple with the rods. Just pull back on the collar to grip or release
the coupling.