Brochure

Pneumatic Power Switch
Air-actuated for safety. There is no
electrical connection between switch
and motor. Switch can be removed
from handle and used as a foot pedal
when working with the cable feeding tool.
Specifications:
Weight:
80 lbs. (36 kg) without cables.
Dimensions:
21" wide x 16" high with handle folded down.
(53 cm x 41 cm)
Motor:
3/4 hp with capacitor and 20 ft. power cord with Ground Fault
Circuit Interrupter; rotates 1-1/4" diameter cables at 500 rpm.
Gear Head:
Rugged cast iron body, ball bearings, cut gears.
Wheels:
10" rubber rear wheels, 6" solid rubber caster wheel.
Cable Feeding Tool
It enables cable to get around tight bends and
traps by taking advantage of open-wound design
of cables. Note that operator controls machine by
using power switch in foot pedal mode.
No Wrench Coupler
G-CDC Cable Drive
Coupler is standard
on Model 88 units
shipped with sections
having “G” couplings. Faster uncoupling at the
machine because large knurled ring can be opened
instantly without wrench.
Automatic Safety Clutch
Protects cable and operator in case the
cable should get caught in the line.
Factory set at 18–20 ft. lbs. but can be
adjusted easily for very heavy jobs or
longer runs.
Combination Hand or Foot Operated Power Switch:
Air activated for safety; no electrical connection between motor
and switch; can be used as hand or foot switch.
Eleven foot air hose.
Power Switch:
Has an “off” position to de-activate the control switch.
Adjustable Safety Clutch:
Factory set at 18 - 20 ft. lbs. Protected by a tamper-resistant
snap-on cover.
Folding Handle:
Reduces truck storage space. Flips down in a second but is
completely secure in operating position.
See pages 30 – 32 for information on cables and cutters.
27
Sectional Drain Cleaners 3" – 10"