Brochure

23
Large Line Drain Cleaners 3" – 10"
Lift Handles
For easy truck loading, tip the
Maxi-Rooter on its loading wheel,
then lift and slide into truck using
lift handle on front leg of machine.
Specifications:
Weight:
136 lbs. (62 kg) without cable.
Dimensions:
27" deep; 23" wide; 42" high, (68 cm x 58 cm x 107 cm).
Drum:
Capacity of 129 ft. (39 m) of 3/4" or 154 ft. (46 m) of 5/8" cable.
Includes 4 ft. of drum connecting cable.
Motor:
3/4 hp heavy duty with capacitor start and forward-off-reverse
switch; 20 ft. power cord with molded plug (3-wire, 16 gauge)
and Ground Fault Circuit Interrupter.
Load Speed: 160 rpm.
Wheels:
10" semi-pneumatic heavy-duty tires with ball bearings.
Wheel Brake:
Locks machine in place on the job.
Foot Switch:
Pneumatic with no electrical contact between pedal and motor.
Power Cable Feed:
Variable speed feed drives and retracts cable at 0-20 ft.
per minute.
Leather Gloves:
With double-reinforced palm for hand protection when
guiding cables.
Cutters: See page 30.
Cables:
3/4" diameter for 4-10" lines and 3" lines without sharp bends.
5/8" diameter for 3-6" lines.
Cable Guide Tube: See page 32.
Truck Loading Wheel:
Makes it easier to lift machine onto bed of truck.
Tool Box:
Can hold a full cutter set, except for leader.
Stair Climbers:
V-Belts running on nylon rollers.
Flexicore
®
Cable
Wire Rope Center Construction
Heavy-gauge wire coiled tightly around 49-strand aircraft-type wire rope and heat treated.
Has unequalled strength and the right amount of flexibility. So tough it carries a one-year warranty against defect or breakage.
Flexicore Patent Nos. 2,244,735 and 2,849,870
Convenient Tool Box
A tool box large enough to hold a set of
cutting heads and some tools is built into
the back of the Maxi-Rooter.