Brochure

17
Power Cable Feed
The Sewerooter T-4’s power cable
feed is a real labor saver. It enables
you to vary feeding speed in and out
of the line more easily and also gives
you better control when working
through tough stoppages. The Guide
Tube reduces whipping and drag
while protecting your hands from
the spinning cable. Five foot Guide
Tube Extensions are available.
Stair Climbers and Truck Loading Wheel
Big ten inch heavy-duty semi-pneumatic wheels roll easily
over rough terrain to and from the job. V-Belt stair climbers let
you take the machine up a flight of stairs by yourself.
Truck loading wheel in the handle makes it easier for one
person to lift the machine into a truck bed.
Folding Handle
The handle is tall enough to
make it easy to move to the job,
yet quickly folds to take less
room in your truck.
Specifications:
Weight:
92 lbs. (42 kg) without cable.
Dimensions:
27" (68.5 cm) deep,
18-1/2" (47 cm) wide,
46" (117 cm) high; 26" (66 cm) with handle folded down.
Drum Capacity:
100 ft x 9/16" (30 m x 14.2).
75 ft. x 5/8" (22.5 m x 15.8).
Drum Removal:
Remove one bolt and slide drum off shaft.
Motor:
1/3 hp with capacitor, forward-off-reverse switch
20 ft. power cord and ground fault circuit interrupter.
Foot Switch:
Pneumatic, with no electrical contact between
pedal and motor.
Power Cable Feed:
Drives and retracts at variable speed of up to 20 ft. per minute.
Wheels:
10
" Heavy-duty wheels with roller bearings.
Wheel Brake:
Passive wheel brake system holds the machine in place
on the job or in the truck.
Stair Climbers:
Heavy-duty V-belts running on nylon rollers.
Truck Loading Wheel:
Enables one person to lift machine onto bed of truck.
Cutter Holder:
Cutter Holder on the frame keeps all the cutters within easy reach.
Leather Gloves:
With double-reinforced palm, for hand protection when
guiding cable.
Cables:
Left-wound Flexicore
®
wire rope center 5/8" diameter
for 3" to 6" lines; 9/16" diameter for 3" to 4" lines.
(Not for roots).
Cutters:
See Parts and Accessories on page 30.
Medium Line Drain Cleaners 3" – 6"