Manual

Page 21 of 44
The machine should be returned to the manufacturers (or an approved service agent) after every 1000 hours
use (or at intervals of 12 months) for a major service. The service will include the following.
• Strip down the machine.
• Clean and inspect all parts for damage, replace as necessary.
• Check all screws and fasteners for damage, replace as necessary.
• Check all bearings for smooth running, replace as necessary.
• Check all electrical connections for continuity and damage, remake connections and/or replace connectors
as necessary.
• Check all air box connections and insert settings. Replace any badly damaged parts which compromise
sealing integrity as necessary.
• Check / Replace lower housing seals.
• Check / Replace the drive shaft seal housing “O” rings.
• Rebuild the machine, to current build standard.
• Test.