User Manual

• Do not measure tensions of 1/2" diameter

strand with the cable in place; these tension

values usually exceed 10,000 pounds.

• Do not drop or jar the Tensionmeter.

• Raise and lower the instrument with a hand

line.

• Keep the device away from dirt, grease, sand

or water.

• Keep foreign material from damaging the dial

or plunger.

• Maintain the unit in the carrying case when-

ever possible.

• Make certain that the correct calibration chart

is always kept in the carrying case.

• Use the Tensionmeter only on strand type and

sizes shown on the calibration chart.

• Do not use this device on strand tensioning

applications exceeding 10,000 pounds.

pPrecautions

The Tensionmeter is primarily made from nickel-

plated steel and is furnished in a hard shell plastic

carrying case; the interior is cushioned with foam

for unit protection.

Each Tensionmeter has a registered serial number

stamped on the unit.