User Guide

ManualsBrandsGENERAL LIFE ManualsRoom ThermostatGENERAL Life HT100S Digital Room Thermostat

Table Of Contents

GENERAL SPECIFICATIONS

HT100S is a wired room thermostat. The user can adjust the room

temperature with the required temperature and get more comfortable

and economic heating.

 Precise Temperature Measurement Wired Connection

 ON/OFF Control TPI Algorithm

HT100S AND EQUIPMENTS

TECHNICAL DATA

ROOM THERMOSTAT

Room Thermostat Indicator LED Descriptions

ROOM THERMOSTAT PLACEMENT

Room Thermostat needs to be placed in the room which is used most

frequently.For instance; living room or lounge.Placing the Room

Thermostat in a spot that have air circulation like entrance of a room

or side of window should be avoided. Also anywhere close to heating

units such as radiator, stove and spots which get direct sun lights

would not be suitable. Room Thermostat needs to be located above

the ﬂoor 150 cm height. Few trials may be made to ﬁnd the most

convenient spot.

BATTERY PLACEMENT

Before starting, power off the device connected to the Room

Thermostat and make sure that the energy is cut off.

As shown in the picture above, press the screwdriver forward from the

space shown, bend the tabs and separate the front cover. Insert 2 new

AAA alkaline batteries in the battery housing with the correct battery

direction. Replace both batteries at the same time. Then align the

front part of your Room Thermostat to the back and squeeze it

towards the back.

WARNING!

When the product is not used for a long period (more than 15 days),

remove the batteries. Otherwise, malfunctions that may occur would

be out of warranty.

Please throw your dead batteries into the waste bin for batteries.

2 3

HT100S

Room Thermostat

generallife.com.tr

85mm / 125mm / 24mm

3V DC (2 x AAA alkaline battery)

2A/30VDC (Resistive load)

0.5A/125VAC (Resistive load)

0.1 C

o o

(5 C) – (35 C)

1 Year (2 x AAA)

o o

(-10 C) – (+50 C)

o o

(-20 C) – (+60 C)

HT100S USER MANUAL

Dowels and

Screws

Alkaline

Battery

AAA

HT100S

USER MANUAL

DIGITAL ROOM THERMOSTAT

Adjustment Knob

Indicator LED

The relay contact opens and the heating unit

stops working.

The relay contact closes and the heating unit

starts.

If it blinks once

If it blinks twice

min. 20 cm

150 cm

ROOM THERMOSTAT WIRING DIAGRAM

WARNING!

Operations inside the boiler or related to the electrical installation

must be carried out by persons with professional competence.

TPI ROOM THERMOSTAT WORKING LOGIC

Your Room Thermostat works with the TPI algorithm in the heating

option. Room Thermostats using TPI technology predict when the

temperature of your home will rise above or below the set

temperature and turn the heating unit on and off accordingly. This

ensures that your home stays at the temperature you set without

maximum deviations up and down.

 What is TPI?

TPI technology is designed to ensure that you get the best possible

energy eﬃciency from your heating system. It measures and applies the

best possible timings to deliver and maintain your home at the set

temperature level.

 How does TPI work?

Thanks to the advanced artiﬁcial intelligence technology found in the

software, it adapts to the temperature change of the environment in

which it is located. By creating a general temperature map of your home,

it learns how long it takes to reach the desired room temperature and

how to maintain this temperature. In this way, it provides minimum

energy consumption by calculating how long your heating unit should

work for.

 What is the difference?

In non-TPI room thermostats, the heating unit works and stops

continuously until it exceeds the set temperature value. If the set

temperature drops below a certain amount, the heating unit will work

again. This creates greater temperature ﬂuctuations and less energy

control. TPI Room Thermostats, on the other hand, provide higher

savings and comfort compared to On/Off room thermostats with the

advantages it has.

TPI ROOM THERMOSTAT WORKING GRAPHIC

ENGLISH

generallife.com.tr

DIGITAL ROOM THERMOSTAT

Dimensions ( H / L / W )

Operating Current

Relay NO Switching Current

Temperature Measurement

Accuracy

Operating Temperature Range

Battery Life

Operating Temperature

Storage Temperature

TEMPERATURE (ºC) Desired Temperature TPI Room Thermostat

Time

COMNO

HEATING UNIT

Summary of content (2 pages)

PAGE 1
ENGLISH DIGITAL ROOM THERMOSTAT generallife.com.tr HT100S USER MANUAL ROOM THERMOSTAT PLACEMENT Room Thermostat needs to be placed in the room which is used most frequently.For instance; living room or lounge.Placing the Room Thermostat in a spot that have air circulation like entrance of a room or side of window should be avoided. Also anywhere close to heating units such as radiator, stove and spots which get direct sun lights would not be suitable.
PAGE 2
WHAT TO KNOW ABOUT TPI ROOM THERMOSTAT  If the placement of the TPI Room Thermostats is changed, the learning process will restart. The learning process should be considered as 7 days.  If the TPI Room Thermostats are de-energized (battery replacement), the learning process will restart. The learning process should be considered as 7 days. F REQUENTLY ASKED QUESTIONS  Is my Room Thermostat compatible with my boiler? If your boiler has on-off connections, your Room Thermostat is compatible.