PowerGrower ® 8-Pack Assembly Guide
POWERGROWER 8-PACK PARTS 1 ASSEMBLY 18 17 16 STEP 1 2 15 3 4 5 6 7 8 9 10 11 12 13 POWERGROWER 8-PACK PARTS: 1: Reservoir & Controller (2) 2: Reservoir & Controller Lid (2) 3: Hatch Cover (2) 4: Reservoir & Controller Connecting Hose 5: Float Valve with pipe thread compound 6: Controller Drain Level Tube 7: Circulating Pump Column with Collar 8: Circulating Pump Connector with Split Tee 9: Drip Rings (8) 10: Clear Airline (8) 11: Pumping Columns with Support Tubes (8) 12: Individual Drain
ASSEMBLY STEP 2 Insert the Drain Level Tube (part 6) into the 1/2” grommet on the side with the support tab. Insert Circulating Pump Connector with Split Tee (part 8) into the 1” grommet opposite the Drain Level Tube and support the grommet from the backside while securing the Split Tee into the grommet. STEP 3 Insert the Circulating Pump Column (part 7) into the tabs on the bottom of the Controller (part 1) and push the collar down over the tabs.
ASSEMBLY STEP 6 The individual growing units can be arranged in a compact honeycomb design or all 8 can be used in two rows (See Diagrams in Step 12). If you choose the compact honeycomb design, set one of the Individual Reservoirs (part 16) aside to be used in assembling a stand alone unit. Insert a Split Tee (part 14) into the 1” grommet for each of the remaining Individual Reservoirs . STEP 7 Place the Growing Chambers (part 17) on the remaining Individual Reservoirs.
ASSEMBLY STEP 12 To setup the individual growing units in a compact honeycomb pattern, arrange the controller assembly and the individual growing units according to the following diagram. Cut the Blue Tubing (part 13) into eight 20” long pieces, and connect the individual units to each other and the controller assembly. ASSEMBLY STEP 14 Connect the manifold to the Dual Diaphragm Air Pump (part 18) and connect the airline tees (that are packaged with the Dual Diaphragm Air Pump) to the manifold.
HELPFUL GUIDELINES HELPFUL GUIDELINES & TROUBLE SHOOTING FILLING When filling the system with a nutrient solution it is best to mix the nutrients in a known volume of fresh water and pour into the controller until the system reaches the desired level. The controller and 7 individual growing units holds approximately 28 gallons. The controller and 8 individual growing units holds approximately 30 gallons.
FLORANOVA® FloraNova represents a break-through in fertilizer technology. FloraNova gives users both the strength of a dry concentrate and the ease of a liquid. This unique formulation of highly purified minerals and natural additives combines the benefits of both organic and soil less gardening methods. Optimum nutrient absorption is aided by natural humic extracts for increased quality and superb yields. FloraNova is a one part formula that is pH stabilized outstanding for all plant types.
