Material Safety Data Sheet

ManualsBrandsGeneral Hydroponics ManualsFertilizers & Plant FoodGeneral Hydroponics Flora Series Performance Pack

FloraMicro

Advanced Nutrient System

7. Handling and storage

See NFPA 430, Code for the Storage of Liquid and Solid Oxidizers. Store in accordance

with local regulations. Store in original container protected from direct sunlight in a dry

cool and well-ventilated area, away from incompatible materials (see section 10) and

food and drink. Separate from reducing agents and combustible materials. Keep

container tightly closed and sealed until ready for use. Containers that have been

opened must be carefully resealed and kept upright to prevent leakage. Do not store in

unlabeled containers. Use appropriate containment to avoid environmental

contamination.

Storage :

8. Exposure controls/personal protection

Use a properly fitted, air-purifying or supplied air respirator complying with an approved

standard if a risk assessment indicates this is necessary. Respirator selection must be

based on known or anticipated exposure levels, the hazards of the product and the safe

working limits of the selected respirator.

Safety eyewear complying with an approved standard should be used when a risk

assessment indicates this is necessary to avoid exposure to liquid splashes, mists or

dusts.

Personal protective equipment for the body should be selected based on the task being

performed and the risks involved and should be approved by a specialist before handling

this product.

Personal protection

Eyes

Skin

Respiratory

Consult local authorities for acceptable exposure limits.

Chemical-resistant, impervious gloves complying with an approved standard should be

worn at all times when handling chemical products if a risk assessment indicates this is

necessary.

Hands :

Engineering measures :

Use only with adequate ventilation. If user operations generate dust, fumes, gas, vapor

or mist, use process enclosures, local exhaust ventilation or other engineering controls

to keep worker exposure to airborne contaminants below any recommended or statutory

limits.

Hygiene measures :

Wash hands, forearms and face thoroughly after handling chemical products, before

eating, smoking and using the lavatory and at the end of the working period. Appropriate

techniques should be used to remove potentially contaminated clothing. Wash

contaminated clothing before reusing. Ensure that eyewash stations and safety showers

are close to the workstation location.

Recommended monitoring

procedures

If this product contains ingredients with exposure limits, personal, workplace atmosphere

or biological monitoring may be required to determine the effectiveness of the ventilation

or other control measures and/or the necessity to use respiratory protective equipment.

Environmental exposure

controls

Emissions from ventilation or work process equipment should be checked to ensure they

comply with the requirements of environmental protection legislation. In some cases,

fume scrubbers, filters or engineering modifications to the process equipment will be

necessary to reduce emissions to acceptable levels.

Liquid. [Aqueous solution.]

5.8

-1.11°C (30°F)

1.25

Easily soluble in the following materials: cold water and hot water.

Odorless.

Brown. [Dark]

Melting/freezing point

9. Physical and chemical properties

Physical state

Relative density

Solubility

Odor

Color

4/8

Tel : +1-888-GHS-7769 (447-7769) / +1-450-GHS-7767 (447-7767)