Material Safety Data Sheet

SECTION 7. HANDLING AND STORAGE
Handling Precautions: Avoid inhalation of dust. Wear an appropriate NIOSH-approved
respirator for protection against nuisance dusts where airborne dust levels are excessive.
Respirator usage must be in accordance with OSHA requirements (29 CFR 1910.134).
Storage Requirements: No special requirements
Regulatory Requirements: Follow applicable OSHA regulations
SECTION 8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Engineering Controls: Provide general or local exhaust ventilation systems to maintain
airborne concentrations as low as possible.
Administrative Controls: Avoid airborne dust.
Respiratory Protection: If this product is used as directed, repiratory protection is not required.
Seek professional advice prior to respirator selection and use. Follow OSHA respirator
regulations (29 CFR 1910.134) and, if necessary, wear a MSHA/ NIOSH-approved respirator. If
respirators are used, OSHA requires a written respiratory protection program that includes, at
least: medical certification, training, fit testing, periodic environmental monitoring, maintenance,
inspection, cleaning, and convenient, sanitary storage areas.
Protective Clothing / Equipment: No special clothing is required.
Comments: Never eat, drink, or smoke in work areas. Practice good personal hygiene after
using this material, especially before eating, drinking, smoking, using the toilet, or applying
cosmetics.
SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES
Physical State: Granular
Appearance and Odor: Diamond Black
TM
is a black granular odorless material.
Odor Threshold Range: Unknown
Vapor Pressure: Unknown
Water Solubility: Not soluble
Other Solubilities: Unknown
Boiling Point / Freezing Point / Viscosity: Unknown
SECTION 10. STABILITY AND REACTIVITY
Stability: Stable at room temperature in closed containers under normal storage and handling
conditions.
Polymerization: Hazardous polymerization cannot occur.