Specification Sheet

Mixing and Application:
• Catalyst Ratio: 3 oz / gal GF Crosslinker if desired
• Pot Life: 6 days with catalyst
• Shelf Life: 1 year, minimum
• Reducer/Thinner: Enduro Extender (10%-20%)
• Accelerate Dry: Enduro Accelerator (10%-20%)
Stain & Sealer Recommendation:
Not applicable.
Surface Preparation:
Surface must be clean, dry, and free of all contaminants.
Sand with 220 micron (extra fine sanding pad) or finer be-
tween coats. Consult product label for additional informa-
tion.
Topcoat Recommendation:
Use Enduro Water Base Lacquer or Enduro Poly or High
Performance topcoats. May be topcoated with Acrylic
Emulsions or Latex Paints, however since formulations
vary, it is recommended that adhesion should be evalu-
ated to confirm compatibility.
Application:
• Conventional Spray:
• Air Assisted Airless
• HVLP
• Airless
Cautions:
• Mix container before use
• For industrial use only
• Protect from freezing
•
Do not apply in temperatures below
60
o
F
• Read MSDS for safety information
• Clean-up Information:
For best results, clean all equipment
with General Finishes Brush and Gun
Cleaner. General clean-up with soap
and water recommended. Rinse
thoroughly with clean water.
NOTICE: All of the above statements, recommendations, suggestions, and data concerning the subject material are based on laboratory results and
believed to be reliable. We expressly do not represent, warrant, or guarantee the accuracy, completeness or reliability of same, or the material or
the results to be obtained from the use thereof, neither do we warrant that any such use, either alone or in combination with other materials shall be
free of the rightful claim of any third party by way of INFRINGEMENT or the like and (THE MANUFACTURER DISCLAIMS ALL
WARRANTIES, EXPRESSED OR IMPLIED,) OF MERCHANTABILITY and FITNESS FOR A PARTICLUAR PURPOSE.
Enduro White Undercoat
030210
The industry leader in water based technology.