Specification Sheet

Product Data:
• Density: 12.3 lbs./gal
• Weight Solids: 60%
• Volume Solids: 40%
• Viscosity: 1000—1500 cps
Method: Brookfield
Viscometer @72
o
F
• pH: 7.5 - 8.5
• Coating V.O.C.: 209 g/l ( 1.74 lbs/gal)
(excluding water)
• Material V.O.C.: 118 g/l ( 0.99 lbs/gal)
(as supplied)
• % VOC: 8.0%
• Storage: Protect from Freezing
Container:
Gallons, 5-gal Pails, and 55-gal Drums
Color Matching:
Limited color matching available
Dry Time 70
O
F and 70% R.H:
• Dry: 10 - 30 minutes
• To Sand: 30 minutes -2 hours
Classification:
Water Based Acrylic UNDERCOAT
Product Description:
Enduro WHITE UNDERCOAT is the perfect foundation for
topcoats. A spray grade blockout primer that has great fill
characteristics, yet sands to a fine powder in just minutes,
not hours. It is the perfect primer for MDF as well as all
other woods. Designed for spray applications as sup-
plied, it may be reduced if necessary 10% with water or EF
Extender.
Enduro White Undercoat is VOC-Compliant, low odor, non-
flammable, and will clean-up with soap and water
For additional chemical, water, & abrasion resistance, add
General Finishes Enduro Crosslinker.
Application:
HVLP: Use a 0.052”—0.072” (1.1—1.8mm) nozzle / tip as-
sembly & medium air cap. Allow 30 minutes -2 hours dry
before sanding (temperature / humidity dependent). Sand
with #220 micron or finer pad / paper between coats. One
to two coats recommended.
Air-Assisted Airless: Use a 0.013”– 0.017” tip for best re-
sults.
The industry leader in water based technology.
WHITE
UNDERCOAT
General Finishes, 2462 Corporate Circle, East Troy, WI 53120
800.783.6050 (F) 262.642.4707
www.generalfinishes.com
ENDURO