Specification Sheet

ManualsBrandsGeneral Finishes ManualsHome Decor1 Quart Interior RTM (Ready To Match) Water Base Wood Stain

The industry leader in water based technology.

ENDURO

General Finishes, 2462 Corporate Circle, East Troy, WI 53120

800.783.6050 (F) 262-642-4707

www.generalfinishes.com

RTM

STAIN

Classification:

Water Base Stain

Product Description:

General Finishes Ready-To-Match (RTM) Stain System is

an interior water base color matching system designed to

make your color matching ability a breeze!. The system

consists of 10 standard stain color concentrates and a

Clear Base that are intermixed to make an endless amount

of colors.

RTM Stains are uniquely formulated to provide specific

advantages normally not found in water base stain tech-

nology. RTM Stains exhibit excellent open time, will not

settle hard, and have exceptional compatibility to assure

easy blending and uniform colors. They wipe easily and

rich, dark colors can be obtained in on coat.

Application:

May be applied via rag, brush, pad or spray, then wiped.

Stir well before application. Apply liberal amount of stain

over the entire work area before wiping with a clean paper

towel. EF Extender may be added to increase open time if

needed. Spray equipment: HVLP: 0.43-0.51” fluid tip / me-

dium cap; 0.051” fluid tip / medium cap. Air-Assisted Air-

less: 0.011-0.013” fluid tip, 300-600 psi fluid pressure, 10-

30 psi air pressure. Allow to dry before topcoating.

Product Data:

 Density: 8.4 -9.1 lbs. / gal

 Weight Solids: 12 - 20% (color

dependant)

 Volume Solids: 11 - 14%

 Viscosity: liquid-color

dependant

 pH: 7.0 - 8.5

 V.O.C.: 179-344g/l (1.3-

2.9 lb/gal) excl water

 Material V.O.C: 29-71 g/l (0.24-0.59 lb/

gal)

 % VOC: 2.8 - 7.0%

 Storage: Protect from Freezing

Container:

Quarts, Gallons, Fives and Drums

Color:

10 Stock Colors & 1 Clear Base

Dry Time 70

F and 70% R.H:

 Dry: 1-2 hours

 To Topcoat: 1-2 hours

Summary of content (2 pages)

PAGE 1
RTM STAIN ENDURO The industry leader in water based technology. Product Data: Classification: Water Base Stain  Density: 8.4 -9.1 lbs. / gal  Weight Solids: 12 - 20% (color dependant) an interior water base color matching system designed to  Volume Solids: 11 - 14% make your color matching ability a breeze!. The system  Viscosity: liquid-color dependant  pH: 7.0 - 8.5  V.O.C.: 179-344g/l (1.32.9 lb/gal) excl water  Material V.O.C: 29-71 g/l (0.24-0.
PAGE 2
The industry leader in water based technology. Mixing and Application: Application: Catalyst Ratio: None  Conventional Spray: Pot Life: Not Applicable  Air Assisted Airless Shelf Life: 1 year, minimum  HVLP Reducer/Thinner: EF Extender (10 -20%) if necessary  Brush  Pad Applicator Sealer & Finish Recommendation: Can be topcoated with most water base, oil base, and solvent base finishes, varnishes, & lacquers. Compatible with all General Finishes topcoats.