Safety Data Sheet - Clear

RTM Tint Base Clear
Section 8. Exposure controls/personal protection
Use a properly fitted, air-purifying or supplied air respirator complying with an approved
standard if a risk assessment indicates this is necessary. Respirator selection must be
based on known or anticipated exposure levels, the hazards of the product and the safe
working limits of the selected respirator.
Respiratory protection
:
Section 9. Physical and chemical properties
Physical state
Melting point
Vapor pressure
Relative density
Vapor density
Solubility
Liquid.
0°C (32°F)
1.01
Not available.
Not available.
Soluble in the following materials: cold water and hot water.
None
Odor
pH
Clear.
Color
Evaporation rate
Not available.
Auto-ignition temperature
Flash point
Not available.
Not available.
Not available.
8.3
Viscosity
Dynamic (room temperature): 50 mPa·s (50 cP)
Not available.
Odor threshold
Partition coefficient: n-
octanol/water
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
Appearance
Boiling point
:
100°C (212°F)
Flammability (solid, gas)
:
Not available.
Lower and upper explosive
(flammable) limits
:
Not available.
Decomposition temperature
:
Not available.
Section 10. Stability and reactivity
Hazardous decomposition
products
Conditions to avoid
Protect from freezing.
Under normal conditions of storage and use, hazardous decomposition products should
not be produced.
The product is stable.
Chemical stability
Reactive or incompatible with the following materials: oxidizing materials.
:
:
:
Incompatible materials
:
Possibility of hazardous
reactions
:
Under normal conditions of storage and use, hazardous reactions will not occur.
Reactivity
:
No specific test data related to reactivity available for this product or its ingredients.
5/10
Tel : +1-888-GHS-7769 (447-7769) / +1-450-GHS-7767 (447-7767)
www.kmkregservices.com www.askdrluc.com www.ghssmart.com