MSDS

Blue Moon Milk Paint
Section 8. Exposure controls/personal protection
Based on the hazard and potential for exposure, select a respirator that meets the
appropriate standard or certification. Respirators must be used according to a
respiratory protection program to ensure proper fitting, training, and other important
aspects of use.
Respiratory protection
:
Section 9. Physical and chemical properties
Physical state
Melting point
Vapor pressure
Relative density
Vapor density
Solubility
Liquid. [Viscous.]
Not available.
Not available.
9.7 lb/gal
Not available.
Soluble in water.
Latex.
Odor
pH
Blue.
Color
Evaporation rate
Not available.
Auto-ignition temperature
Flash point
Not available.
Not available.
Not available.
7.8 to 9
Viscosity
Dynamic: 1500 mPa·s (1500 cP) @ 75°F
Not available.
Odor threshold
Partition coefficient: n-
octanol/water
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
Appearance
Boiling point
:
Not available.
Flammability (solid, gas)
:
Not available.
Lower and upper explosive
(flammable) limits
:
Not available.
Decomposition temperature
:
Not available.
Flow time (ISO 2431)
:
Not available.
VOC content
:
36 g/L
Section 10. Stability and reactivity
Hazardous decomposition
products
Conditions to avoid
Protect from freezing.
Under normal conditions of storage and use, hazardous decomposition products should
not be produced.
The product is stable.
Chemical stability
Reactive or incompatible with the following materials: oxidizing materials.
:
:
:
Incompatible materials
:
Possibility of hazardous
reactions
:
Under normal conditions of storage and use, hazardous reactions will not occur.
Reactivity
:
No specific test data related to reactivity available for this product or its ingredients.
6/10
Tel : +1-888-GHS-7769 (447-7769) / +1-450-GHS-7767 (447-7767)
www.kmkregservices.com www.askdrluc.com www.ghssmart.com