Operation Manual

3/4″ FULL-WIDTH OVERLAY CUSTOM PANELS WITH CUSTOM HANDLES

This panel design provides a nearly trimless appearance.

Assemble the spacer panel

onto the finished backer

panel. Allow 1/2″ clearance

on all sides. Secure the

panels with glue. Be sure to

observe clearances shown

on all sides.

Secure the overlay

panel to the assembled

backer/spacer panel.

Use glue and screws.

Countersink screws

into the backer panel.

42″ Models A B

1/4″ Backer Panel 22-5/16″ 67-7/8″

0.10″ Spacer Panel 21-13/16″ 66-7/8″

3/4″ Overlay Panel 22-5/16″ 68-1/8″

48″ Models A B

1/4″ Backer Panel 26-7/16″ 67-7/8″

0.10″ Spacer Panel 25-13/16″ 66-7/8″

3/4″ Overlay Panel 26-7/16″ 68-1/8″

Fresh Food Panel

Spacer

Panel

Finished

Backer

Panel

Installation Instructions