User's Manual

Table Of Contents
93
Section 9. Optional Equipment and Accessories
79-0003-003 22 October 1999
Connecting an External Monitor
The computer has a Display Selection feature that allows you to
switch between the computer display, an external monitor, or both as
the active display.
To use an external monitor, first connect the monitor cable to the 15-pin
video port on the back of the computer and then follow the procedure
below.
To select a display
1 From the Desktop, double click the Display Select icon.
2 Select one of these options:
LCD Panel to use the computer display
Monitor / LCD to use both displays
3 Choose OK.
Connecting an External Mouse
You can connect an external mouse to the serial port of the computer.
First select the appropriate mouse manufacturer and model as
described below, and then enable the communication port by making
changes in the System Configuration Utility (SCU).
To connect an external mouse
1 Connect the mouse to the 9-pin serial port on the back of the
computer.
2 From the Start Menu, select Control Panel, Settings, and then choose
Mouse.
3 Select the General tab, and then choose Change.
4 Make sure Show all devices is enabled.