User's Manual

Table Of Contents
81
Section 7. Managing Batteries and Power
79-0003-003 22 October 1999
Display
To conserve power, the system turns off the display when the computer
enters suspend mode. It automatically turns on when the computer is
turned back on.
Backlight
The display backlight can be turned on to make information on the
screen easier to read in low-light situations. To conserve power on the
monochrome displays only the system automatically turns off the
backlight after a period of inactivity. You must manually turn the
backlight on by pressing FN+F1 when you resume. You can change the
time-out setting for the backlight in the System Configuration Utility
(SCU). See Section 5, Customizing Settings, for more information.
On a color display, the backlight is always on whenever the computer is
running. See About the Display Backlight below.
About the Display Backlight
10.4-inch color
Backlight is always on when the computer is runnning
FN+F1 toggles MaxBright on/off
FN+F2 dims
FN+F3 brightens
FN+F2 and FN+F3 are active only when MaxBright is off
10-inch monochrome
FN+F1 toggles the backlight on/off
FN+F2 dims
FN+F3 brightens