User's Manual

53
Section 4. If You Have a Radio Modem
79-0003-003 22 October 1999
For MS-DOS Users
If you exit Windows and return to the MS-DOS prompt, use the RADIO
command to enable or disable the radio modem.
Command Action
RADIO ON Enables the radio
RADIO OFF Disables the radio
RADIO Reports the current radio status
You can also enable or disable the radio using the DOS Radio Status
resident utility. While running your radio application software, press
CTRL+ALT+R to pop up the DOS Radio Status screen.
Factory Installed Radio Software
The mobile computer includes factory installed software that makes it
easy to verify the operation of your integrated radio modem. These
programs are located in the Radio Tools folder.
TIP If the computers battery becomes low, the system
automatically disables the radio and extinguishes the radio indicator
light. The system will automatically restore the radio hardware and
indicator light after the low battery condition is corrected.