User's Manual

160
X-C 6250 Pro Users Manual
79-0003-003 22 October 1999
Radio Modems
XCMASC program cant regain network contact after the radio
detects a low battery even when the battery is recharged
•
The radio power must be cycled before the radio will resume contact
with the network.
Radio application cannot find radio modem
•
Make sure the IRQ setting for COM4 is set correctly in the SCU.
Many DOS applications assume this to be IRQ 3 rather than the
default of IRQ 10.
See Section 5, Customizing Settings.
• Make sure that XCPRF is being loaded in AUTOEXEC.BAT before
starting the application.
Activating the Radio TSR while in the DOS Editor causes the
computer to lock up requiring a hardware reset
• Do not use CTRL+ALT+R while inside the DOS Editor.
The Transparent Mode application doesnt work
• This application is only for the ARDIS radio network.