User's Manual

158
X-C 6250 Pro Users Manual
79-0003-003 22 October 1999
Radio Modems
5 From a DOS prompt, enter: C:\XCTOOLS\XCMASC.
6 Check to make sure the radio indicator light is on.
The following messages appear in order:
Network Contact Lost (or something similar as it starts up)
Network Contacted
If you receive the first message and not the second, your unit is
probably not registered. See Section 4, If You Have a Radio
Modem, for more information, or contact your companys help desk
for assistance.
7 After the Network Contacted message appears, your radio ID is
displayed. Make sure this matches the ID on the bottom of your
computer.
If these numbers do not match, contact your companys help desk
for assistance.
8 If your unit is registered, type some text and press
ENTER.
This sends the text to the RAM network which in turn sends it back
to you (sending a message to yourself). After receiving a message,
this text appears at the top of the screen: MPAK received. This
means the message was sent successfully. MPAK rejected means
that the message just echoed back to itself internally within the
modem (you may be out of range).
9 Press
ALT+R to display signal strength.
If it is greater than 0 db, your radio is probably working correctly.
Press
F1 for help on other keys.