User's Guide

2110059 Rev 1.0 Proprietary and Confidential Page 73
9.3. SB300 CDPD Modem
Part number 1100034
9.3.1. Mechanical
9.3.1.1. Physical Description
The SB300 comes in a Type III package, and includes a
30-pin, 0.5mm pitch ZIF connector for the host interface,
a MMCX connector for the antenna, and a status LED. Dimensions (in mm) are as follows:
Figure 9-1: SB300 Physical Dimensions [mm].
9.3.1.2. Mounting
The SB300 uses an industry standard Type III frame-kit, and as such will fit into PC Card rails.
Alternatively, two clips or a bracket may be used to secure the module. There are also two
mounting holes provided on either side of the ZIF serial connector.
Figure 9-2: SB300 Package Views.