User's Guide

User’s Guide Product Descriptions
2110059 Rev 1.0 Proprietary and Confidential Page 71
9.2.4. Environmental Specifications
SB300 SB302 SB320
Operating Temp. -30 to +65
o
C -30 to +65
o
C -30 to +65
o
C
Storage Temp. -40 to +85
o
C -40 to +85
o
C -40 to +85
o
C
Humidity 5% to 95%
non-condensing
5% to 95%
non-condensing
5% to 95%
non-condensing
Vibration
Operational: IS-19C
Survivability:
Mil-STD202
None
Operational: IS-19C
Survivability:
Mil-STD202
Shock 1 metre drop to a hard
surface
None 1 metre drop to a hard
surface
9.2.5. Connector Part Numbers
This section summarizes the parts used, their mating parts, and identifies the suppliers so that you
can acquire the needed connectors for the host equipment / accessories.
9.2.5.1. Antenna Connector
All models of the SB300 Series use the same MMCX type antenna connector.
Modem: Huber & Suhner 85 MMCX-50-0-1 Female
Huber & Suhner 11 MMCX-50-1-1
Straight plug for RG 178 B/U
MaleSuggested Antenna Cable
Connectors:
Huber & Suhner 16 MMCX-50-1-1
Right angle plug for RG 178 B/U
Male
Huber & Suhner can be contacted via www.hubersuhner.com.
9.2.5.2. SB300 and SB320 Host (DTE) Connectors
The SB300 and SB320 both use a 30-pin ZIF connector with 0.5mm pin spacing for the host serial
connection. The connection is made using a 30-pin 0.5mm pitch Flat Flex Cable. The host end of
the cable can be connected as suits your needs.
SB300 / 320 Modems: Hirose FH12-30S-0.5SH
Hirose can be contacted via www.hiroseusa.com.
The Cable can be obtained from several suppliers including:
Axon Cable (www.axoncable.com)
Parlex Corp