User's Guide

User’s Guide Wireline Operation
2110059 Rev 1.0 Proprietary and Confidential Page 63
7.4. Auto-answer a Wireline Call
Your application can use the SB320 modem just like any other landline modem. The modem
setup string should be the appropriate factory setting as indicated in Section 7.3 above. To enable
auto-answer add:
AT S0=n where n is the ring count on which the modem will answer the line.
You may freely add necessary settings to control the local DTE/DCE interface (echo, verbose,
quiet, etc.) without altering the remote connection settings.