User's Guide

2110059 Rev 1.0 Proprietary and Confidential Page 11
The Operational View
3. Software Installation
3.1. Introduction
This chapter provides instructions for installing Watcher and WirelessExpert™ on a host PC and
using these programs to configure and use the modem. It also includes procedures for updating
the firmware on the modem if needed.
NOTE
Running WirelessExpert is required before using Watcher. WirelessExpert will install
and configure necessary drivers on the host PC.
Watcher
Watcher is a Windows application that configures and monitors Sierra Wireless modems for
CDPD, Circuit Switched Cellular (CSC), and Wireline operation. This chapter explains how to
install Watcher and describes basic Watcher operations and important screen elements.
WirelessExpert
Installation of the drivers required for modem operations is performed with an installation wizard
called WirelessExpert. This can be run at any time to view and edit the cellular activation settings
(NAMs, NEIs, etc.). It allows you to test cellular connections.
3.2. Installing Software on the Host
The software is provided on CD-ROM. The CD is self-starting when inserted into a PC running
Windows 95/98/NT. An installation wizard will guide you through the process.
A menu folder is added to the Start > Programs menu: