User's Manual

6977-0001-002 06/99
Appendix A. Expanding Your T5200 Computer
To connect to external power
1. Insert the appropriate end of the AC Adapter power cord into
the power port on the T5200 computer; insert the other end of
the power cord into an electrical wall outlet.
The AC Adapter automatically begins fast charging the battery.
At moderate temperatures, around 70º Fahrenheit, the battery
will complete charging in approximately three hours. The AC
Adapter is intended for in-house use and should not be used in
extreme conditions.
Stand Alone Battery Charger
The Stand Alone Battery Charger is an optional charging device
used to charge a Lithium Ion battery. This charger allows you to
charge an additional T5200 battery for the mobile computer. The
operating temperature for this device is 0º to +50º Celsius (+32º to
+122º Fahrenheit). Operating the Stand Alone Battery Charger
outside of this temperature range may damage the battery.
To charge a battery
1. Insert the appropriate end of the power cord into the power port
on the Stand Alone Battery Charger; insert the other end of the
power cord into an electrical wall outlet, the AC Adapter or the
Vehicle Adapter.
CAUTION
• There are no user-replaceable parts within the AC
Adapter, so do not open the Adapter case. The AC
Adapter is internally protected. It resets automatically if
there is a power fault.