User's Guide

2110059 Rev 1.1 Proprietary and Confidential Page 87
10.4. SB320 Specifications
Part number 1100033
10.4.1. Mechanical
10.4.1.1. Physical Description
The SB320 comes in a Type III package, and
includes a 30-pin, 0.5mm pitch ZIF connector for
the host interface, a 13-pin I/O connector for the wireline interface, a MMCX connector for the
antenna, and a status LED. Dimensions in millimetres are as follows:
Figure 10-3: SB320 Physical Dimensions [mm].
10.4.1.2. Mounting
The SB320 uses an industry standard Type III frame-kit, and as such will fit into PC Card rails.
Alternatively, two clips or a bracket may be used to secure the module. There are also two
mounting holes provided on either side of the ZIF serial connector.
Figure 10-4: SB320 Package Views.