User's Guide

The Hardware View SB300 Series
Page 80 Proprietary and Confidential 2110059 Rev 1.1
10.2.4. Connector Part Numbers
This section summarizes the parts used, their mating parts, and identifies the suppliers so that you
can acquire the needed connectors for the host equipment / accessories.
10.2.4.1. Antenna Connector
All models of the SB300 Series use the same MMCX type antenna connector.
Modem: Huber & Suhner 85 MMCX-50-0-1 Female
Huber & Suhner 11 MMCX-50-1-1
Straight plug for RG 178 B/U
MaleSuggested Antenna Cable
Connectors:
Huber & Suhner 16 MMCX-50-1-1
Right angle plug for RG 178 B/U
Male
Huber & Suhner can be contacted via www.hubersuhner.com.
10.2.4.2. SB300 and SB320 Host (DTE) Connectors
The SB300 and SB320 both use a 30-pin ZIF connector with 0.5mm pin spacing for the host serial
connection. The connection is made using a 30-pin 0.5mm pitch Flat Flex Cable. The host end of
the cable can be connected as suits your needs.
SB300 / 320 Modems: Hirose FH12-30S-0.5SH
Hirose can be contacted via www.hiroseusa.com.
The Cable can be obtained from several suppliers including:
Axon Cable (
www.axoncable.com) 847-699-8822
Parlex Corp
Fujikura America, Inc. (
www.fujikura.com) 619-613-6600
Suggested pdA number FFC0-50A30/043L440B0BSB
• 0.5 mm pitch
• 30 conductor
• 51 mm LOA
SB320 Wireline Connector
The SB320 has an additional wireline connector for connection to the telephone network via the
host. This is a 13-pin I/O connector.
SB320 Modem: ITT-Cannon CA112112-1 Male
Host Wireline Connection: Contact ITT-Cannon Female
ITT-Cannon can be contacted via www.ittcannon.com.
Small quantities of these mating components may be obtained from Sierra Wireless, Inc. Contact
Sales at 604-231-2100 or
[e-mail].