User's Guide

SB300 Series User’s Guide
Page 2 Proprietary and Confidential 2110059 Rev 1.1
1.1.4. OEM Developer’s Toolkit Checklist
Your toolkit should include the following parts:
SWI Part No. Description
1200054 Multipurpose Interface Board (MIB)
1900000 AC Adapter
006.0011 10’ Serial Cable with 9-pin D connectors
2000068 30-Pin Flat Flex Cable (for SB300 and SB320)
2000071 13-Pin I/O Connector Cable (for SB320)
1710034 13-pin Male SB320 Connector sample
1710134 13-pin Female SB320 Connector sample
1810009 Magnetic Mount Cellular Antenna with coaxial cable
2000066 Cable Adapter for antenna coax to SB modems. (MMCX to SMA)
006.0002 Telephone Cable
1900003 Headset with Microphone, cable and connector.
2000067 16-Pin Ribbon Connector Cable (for SB302)
6000084 CD with Watcher and WirelessExpert™ Revision 3.3.1 or above.
2110031 SB300 Series OEM Modems AT Command Reference
2110059 SB300 Series OEM Modems User’s Guide (this document)
1.2. References
For detailed information on the command interface of an SB300 Series modem, consult the Sierra
Wireless SB300 Series OEM Modems AT Command Reference, document number 2110031,
included in toolkit.
For background information on the nature of wireless communications consult your cellular
service provider and/or their Internet site. All major service providers provide web-based
information on CSC and CDPD.
1.3. Currency
This document is under ongoing revision to maintain currency with product development. Please
check our web site frequently for revisions. This edition is:
Rev 1.1 June 22, 1999
This document is current with the following modem firmware revisions:
SB300
Revision R1.1.1. To determine your firmware revision:
1. Enter the Identification command ATI5
The modem will respond with the Firmware revision information:
R1-1-1 …
The details following the revision number may vary depending on the mode of the modem.