User's Manual

Table Of Contents
63
Section 7. Troubleshooting
77-0001-004 15 November 1999
Make sure the 9-pin null modem serial cable is inserted
correctly
Verify both are communicating at the same speed
Check the communications settings on the T5200 computer and
your desktop:
To check communications settings on the T5200 computer
1 From the Start Menu, select Settings, Control Panel, and
then double-tap the Communications icon.
2 Select the PC Connection tab and make sure the Allow
connection with desktop computer when device is attached
box is checked and Connect using: setting is correct.
To check communications settings on your Windows 95/98
or NT desktop computer
1 From the Start Menu, select Settings, Control Panel, and
then choose System.
2 Select the Device Manager tab, select Modem, and then
choose the communications port you are using.
3 Click on the Properties button, then select the Modem tab
and make sure the port you are using matches the one that
appears in the list.