User's Manual

Table Of Contents
62
T5200 Users Manual
77-0001-004 15 November 1999
Configure button. Under the Device Properties Port Settings
tab, check Manual Dial and configure the Connection Properties
as follows:
Baud Rate 19200
Data Bits 8
Parity None
Stop Bits 1
Flow Control Hardware
Tap OK to save these settings and return to Session Properties.
Enter any digit in the Telephone Number block and tap OK.
This will bring up the Connection Dialing status window for
your session. Type AT and wait for an OK. This creates a
terminal connection to the internal CDPD modem. Refer to
your CDPD modem Users Manual for information on com-
mands available for your modem.
Radio Coverage
For best RF performance the display should be fully open or
fully closed with the antenna in a vertical position.
Desktop Communication Problems
I have installed Windows ActiveSync
®
on my desktop, but I still
cannot see files and folders that reside on my T5200 computer.
Make sure the null modem serial cable from the T5200 com-
puter is connected to an appropriate serial port on your desktop