User's Manual

777-0001-004 15 November 1999
Section 1. Getting Started
Things You Need to Do at Start-up
When you turn on your T5200 computer for the first time, you need
to perform these simple tasks:
• Calibrate the touch screen
• Adjust the screen to your own personal viewing preference
• Set the date and time
• Enter User Information
Calibrating the Touch Screen
Calibrating the touch screen involves touching the screen with the
stylus in specific locations to align the background image with the
screen. The calibration screen is typically the first screen that
appears when you turn on the computer for the first time.
Simply position and briefly hold the stylus at the center of each
crosshair as it appears on the screen.
After this initial calibration, if you cannot select objects accurately
with the stylus, or if you notice later that the stylus is not accurate,
you may need to recalibrate the touch screen. To open the calibra-
tion screen, simultaneously press CTRL, ALT, EQUAL SIGN (=).
CAUTION Use the stylus that comes with your T5200
computer. Using sharp implements such as keys, pens or
mechanical pencils to touch the screen can cause damage to
the screen.