User's Manual

Communications programs such as HyperTerminal or Procomm Plus don’ t seem to work or they lock

Windows



If you are using the internal modem, be sure to specify the proper communications port .



When you first try to use HyperTerminal or similar application, the system responds with a

message asking if you want to install the modem. Answer “ Yes” to this question and follow the

instructions on the screen to install it.

The modem dials and the answering modem generates tone, but our modem does not begin the training

sequence to establish a connection

Although the problem may appear to originate from the computer, the source of the problem is the

answering modem.



Try setting up the answering modem to generate the correct V.22 tone, which can usually be done

by sending an AT command to the modem.



Add %!1300AO to the initialization string. If used, this command must be sent immediately

before the command to dial the desired phone number and sent again before re-

dialing the number

since the modem will default to the original setting at the end of the session.

79_0100_003

13 August 2001



Miscellaneous

The computer shuts off unexpectedly



The computer has entered suspend mode . Press FN+On to turn it back on.



The battery capacity may be low. Connect external power to charge the battery, or replace the

battery with a fully charged one.

The

speaker

volume is too high or too low

GoBook MAX™ Help



Page

GoBook MAX Help

4/16/2003

file://C:\Documents%20and%20Settings\harwoodm.ITRXNT1\Local%20Settings\Temp\~

...