User's Manual

pressing the correct keys for the application you are running.
Incorrect characters appear on the screen when I press certain keys

You may be in NUM LOCK mode. Press FN+NUM LOCK to toggle NUM LOCK mode off.
79_0100_003
13 August 2001
© 2001 Itronix Corporation. All rights reserved.

Landline Modems 
The modem doesn’ t work

When you first try to use HyperTerminal or similar application , the system responds with a
message asking if you want to install the modem. Answer “ Yes” to this question and follow the
instructions on the screen to install it.

Make sure the communication settings are correct in your application. Refer to the online Help
for
your application.
The modem doesn’ t dial a number
Check these things:

If you are using an external modem, make sure the cables are attached correctly.

Make sure your communications parameters are correct in your application. Refer to the online
Help for your application.
The modem dials and receives an answer but does not establish a connection

You may have incorrect parameters selected for your application to talk with the remote modem.
Refer to the online Help for your application.

You may need to adjust your modem
’
s baud rate or protocol selection.
GoBook MAX™ Help

Page
65
of
70
GoBook MAX Help
4/16/2003
file://C:\Documents%20and%20Settings\harwoodm.ITRXNT1\Local%20Settings\Temp\~
...