User's Manual

The Exit Menu
You use the exit menu to leave the BIOS Setup Utility . ESC does not exit this menu. You must select
on of the items from the menu or menu bar to exit.
GoBook MAX™ Help

Field Function
Exit Saving
Changes
After making your selections on the Setup menus, this option stores the
selections displayed in the menus in CMOS, a special section of memory that
stays on after you turn your system off. It then exits the SETUP program. The
next time you boot your computer, the BIOS configures your system
according to the Setup selections stored in CMOS.
During boot up, PhoenixBIOS attempts to load the values saved in CMOS. If
those values cause the system boot to fail, reboot and press F2 to enter Setup.
In setup, you can get the Default Values or try to change the selections that
caused the boot to fail.
Exit
Discarding
Changes
Use this option to exit Setup without storing in CMOS any new selections you
may have made. The selections previously in effect remain in effect.
Use Setup
Settings
Use this option to reload either the first copy of Setup settings or the original
copy.
Load Setup
Defaults
To display the default values for all Setup menus, select "Load Setup
Defaults" from the Main Menu. 
If during boot up, the BIOS program detects a problem in the integrity of
values stored in CMOS, it displays these messages:
System CMOS checksum bad - run SETUP
Press F1 to resume, F2 to Setup
Page
41
of
70
GoBook MAX Help
4/16/2003
file://C:\Documents%20and%20Settings\harwoodm.ITRXNT1\Local%20Settings\Temp\~
...