User's Manual

If you are not sure how to configure the BIOS settings
we suggest that you load setup defaults on the
Exit Menu or press F9, yes, F10, then yes from any menu. This loads optimized default settings for
normal use.
Using the BIOS Setup Utility
The BIOS Setup Utility allows you to configure your computer’ s basic settings. When you turn your
computer on, the system reads this information to initialize the hardware so that it can operate correctly.
You can use the BIOS Setup Utility to change your computer’ s start-up configuration. For example, you
can change your system's security routine.
Starting the BIOS Setup Utility
You can only start the Setup Utility shortly after the computer has been turned on. A prompt appears on
the computer display that says “ Press F2 to run Setup.” When you see this prompt, press the F2 key and
the system will start the Setup Utility and display the main menu of the utility.
CAUTION
Incorrect settings can cause your system to malfunction. To correct mistakes, return to
Setup and restore the Setup Defaults by pressing F9 and selecting yes.
Navigation and Help
GoBook MAX™ Help

Page
30
of
70
GoBook MAX Help
4/16/2003
file://C:\Documents%20and%20Settings\harwoodm.ITRXNT1\Local%20Settings\Temp\~
...