User's Manual
Serial Number : Serial number of the battery
Battery Type: Chemistry type of the battery
LION = Lithium Ion
NiMH - Nickel Metal Hydride
Factory Capacity : Theoretical capacity of this battery type
Actual Capacity: Actual capacity of the battery
New Capacity: This field shows the new capacity after calibration and is updated after the
calibration process is completed. Note that it may not change, but battery performance will
still be improved due to calibration.
NOTE
The unit will not go into suspend mode while Battery Calibration is running.
CAUTION
Do not disconnect AC power while Battery Calibration is running. If AC remains
disconnected for more than two minutes, the application will terminate.
CAUTION
Do not remove the battery while Battery Calibration is running. Doing so will cause the
application to terminate immediately.
79_0100_003
13 August 2001
© 2001 Itronix Corporation. All rights reserved.
Customizing Your BIOS Settings
This chapter explains how to use the Setup Utility to modify the BIOS settings. The Setup Utility
displays and allows modification of the GoBook MAX components and the configuration of devices that
are connected to it. This information is used to test and initialize components at start-up time and to
make sure everything runs properly when the system is operating.
The BIOS is installed with a set of default values. You may be able to increase system performance by
changing some of the timing values in the Setup Utility, but this can be limited by the kind of hardware
you are using. In certain circumstances, the system may generate an error message that asks you to make
changes to the CMOS settings using the Setup Utility. This happens when the system finds an error
during the POST (Power On Self Test) that it carries out at startup.
CAUTION
It is not recommended that you change any settings since this may cause the unit to not
function properly.
Page
29
of
70
GoBook MAX Help
4/16/2003
file://C:\Documents%20and%20Settings\harwoodm.ITRXNT1\Local%20Settings\Temp\~
...