User Manual

holding down the Power Button for at least 10 seconds and then release
it.
n If the Power Button does not work to reset the unit, press the Master
Reset Key on the back side of your GoBook Tablet PC.
The computer won’t turn off
n Press and hold the Power Button for at least 10 seconds.
The computer enters suspend mode too quickly
n
When there is no activity for a period of time, the computer turns off or
enters suspend mode. To extend this time, use the Power Management
program and increase the non-activity time to enter suspend.
The computer doesn’t automatically suspend
n Check to make sure the COM ports are off. For example, exit any
application that uses COM ports.
n Make sure external power is not connected. Depending on power
settings, some systems will not suspend automatically when they are
connected to external power.
n Make sure the standby time is set properly in the Power Management
program.
The system date and time are incorrect
n Reset the correct date and time by choosing the Date/Time icon from
Control Panel and making the appropriate changes.
I receive an “out of memory” error message
n Too many applications may be running at the same time. Close
applications you don’t need.
n If you’re using desktop wallpaper, set wallpaper to None. To do this,
choose Display from Control Panel and make the appropriate change.
n Make sure you have enough space on your hard disk . Contact your
supervisor or your organization’s help desk for assistance.
n Set up a permanent swap file. Contact your supervisor or your
organization’s help desk for assistance.
Holding down the Power button to reset the computer doesn’t always work
Page
59
of
64
GoBook Tablet PC Help
2/23/2004
file://C:\Documents%20and%20Settings\harwoodm.ITRXNT1\Local%20Settings\Temp\~
...