User's Manual

Setting the Date and Time
To set the date and time
1. Tap the Start button, Settings, Control Panel, and double-tap the Date / Time icon.
2. From the Date / Time Properties menu, make changes to the Time and Date, and then close this
screen by selecting OK.
72_0103_003
10 December 2002
©
2002 Itronix Corporation. All rights reserved.
Startup Problems?
If your computer does not operate, try these solutions.

Connect the AC adapter to charge the battery if it is not charged.
NOTE
The Power LED on the AC adapter should be lit as well as the External Power Indicator
on the GoBook II if the AC adapter is connected and functioning properly. Additionally, one
of the power icons should appear in the task tray.

If the AC adapter is connected, make sure the electrical outlet you are using works.

Check to make sure the battery is installed and charged properly.

If the battery doesn’t begin charging, remove the battery, connect the AC adapter, and turn on the
computer by pressing
On
. Reinstall the battery. The Battery Power Indicator LED is solid
while the battery is charging.
The
Troubleshooting
section lists additional solutions you can try.
72_0103_003
10 December 2002
©
2002 Itronix Cor
p
oration. All ri
g
hts reserved.
Darken the display
FN
+
F6
GoBook II™ Help
Pa
g
e 8 of 68GoBook II Hel
p
6/22/2003file://C:\Documents%20and%20Settin
g
s\harwoodm.ITRXNT1\Local%20Settin
g
s\Tem
p
\~...