User's Manual

in the lower right corner), and choose “Stop [card name] card.”

The computer locks up when inserting a PC card



Because of the combination media bay configuration on the GoBook II, the computer may not be

locked up. Instead, it may be taking a couple of minutes before the system recognizes the PC card

slot.

72_0103_003

10 December 2002

Pen/Touch Screen

When I try to use the stylus on my touch screen, nothing happens



If you cannot select objects accurately with the stylus, you may need to recalibrate the touch

screen.

To calibrate the touch screen

1. From the Start Menu, select Programs, Mobile Computer Tools and then choose Touch Screen

Calibrator. This opens the Calibration Applet.

2. Click on the Calibrate button.

3. After you have completed calibration by touching the highlighted points using an approved stylus,

select OK to have the new settings take effect.

The touch screen display warps or pillows in high humidity



The computer remains functional; however, moving the computer to a more suitable environment

will allow the display to recover.

The touch screen doesn't respond after a suspend



The touch screen needs a few seconds to work after a suspend. Wait a moment and try again.

72_0103_003

10 December 2002

GoBook II™ Help

e67of68GoBook II Hel

6/22/2003file://C:\Documents%20and%20Settin

s\harwoodm.ITRXNT1\Local%20Settin

s\Tem

\~...